Perfect Fit Blinds Information

Perfect fit blinds are bringing blinds into the 21st century. Look at the stunning benefits the system has to offer:-

• You can fit 20 -30 blinds in your conservatory in half an hour!
• You can have blinds that simply clip in to tilt and turn windows that do not flop around as you operate the window.
• Your window sills will be completely clear.
• You can unclip your blinds to clean the window and the blinds.
• You do not need to drill into your windows to install perfect fit blinds
• Perfect fit blinds are so neat that they become part of the window frame.
• Special Application - Velux™ Windows
• Special Application - Tilt and Turn Windows
• Special Application - Juliet Balcony

Perfect fit blinds have revolutionised the blinds industry in the last year. From the launch in late 2005 this type of blind immediately became the top selling blind in our range - and we make a lot of blinds!

Our information guide here includes Videos to help you learn about this unique system. The page is long and detailed for which we make no apology. You will need to spend 5 - 10 minutes here reading and watching the videos to learn about Perfect Fit Blinds.

How to measure For a perfect fit blind

We need 3 measurements to supply you with a perfect fit blind

1. The glass width in mm
2. The glass drop in mm
3. The bead depth in mm

The size needed for us to make a perfect fit blind is the visible glass size. That is the gap between the gasket on either side. (The Gasket is a strip of rubber or plastic that fits between the glass and the uvpc window frame) Measure using a steel tape measure in 3 places the width and the drop and give us the smallest of the 3 measurements. Do not take an allowance off this smallest measurement! The third measurement is the depth between the face of the glass and the face of the uvpc frame. This depth must be between 15 and 25mm. Slightly larger bead depths are possible but are excluded from our online shop for technical reasons.
 

How to fit a Perfect Fit Blind

To fit a perfect fit blind you need to insert the clips between the beading and the glass. The lugs on the brackets locate into the lug holes in the perfect fit frame. There are 3 brackets sizes. 18mm, 20mm and 24mm. If your bead depth is not exactly correct for these depths then you can put a foam filler between the perfect fit frame and the uvpc window frame. If you need this foam it will be supplied automatically with your order. You can fit the blinds in any case without the foam filler but it serves to close the gap between the frames.
 

How to fit Handle spacers

If the window handles are close to the face of the uvpc you will need to fit handle spacers. This ensures that the window handles do not interfere with the perfect fit frame. If you have a gap of 9mm or more you will not need these in most cases.

However for very small bead depths of 15-18mm you will usually need them. The spacers come in a 2mm depth and a 4mm depth. If you need these please send an email in addition to your order stating the number of spacers you need.